after plating meaning in Chinese
尾部外板
尾壳板
Examples
- Plating rate was determined by measuring the weight gain of powder after plating , and the ingredients of solution were determined by chemical analysis
镀速用增重法，镀液成分用化学滴定法确定。 - One of metal phthalocyanines was plated , and the effect of reverse saturable absorption performance was discussed after plated
对其中一种金属酞菁化合物进行了蘸膜，探讨了蘸膜后对反饱和吸收特性的影响。 - The aluminium case adopts the aluminium alloy skeleton , its skeleton is aluminium alloy that is specially developed , after plating the membrane , oxidizing dealing with
铝箱采用铝合金骨架，其骨架是专门研制开发的铝型材，经镀膜氧化处理后。 - By using high toughness fiber and fine grit which combined by special bond . used for irregular shap workpiece line grains treatment , every kinds of metal grains and grains treatment after plating , wood lines and other wood wares
造用于不规刚形状的工件上作直线的砂处理，各类金属砂光或电镀后拉砂纹处理，木线条或木相架等木器的打磨，去除毛刺和底漆处理，强韧耐用。 - It was found that before the plating , there is section time to gestating , that we call the " gestating time " and the plating was ended spontaneously after some time , named " plating time " . the analysis of the solution after plating indicated that the too much decrease of ph value results in the reaction to be stopped . the plating time was shortened when the ph and the temperature of the bath were increased
结果表明，镀液ph浙江大学硕士学位论文范启义2003年3月摘要值、施镀温度提高，由于反应的速度加快，使反应时间缩短；硫酸铜浓度提高，有助于加快反应速度，从而缩短反应时间； edta浓度提高，使镀液稳定性升高，对反应时间的影响等效于硫酸铜浓度的降低；而甲醛浓度提高，虽然反应的速度加快，但由于可用于还原的量增加，因此反应时间增加；装载量提高，因能镀覆的表面积增加，使反应时间缩短。